Phone Number; Sip Uri; Sip Server; Registrar Server Address - Panasonic KX-UT670 Administrator's Manual

4.6.2.1 Phone Number

Phone Number
Description
Value Range
Default Value
Configuration File Reference

SIP URI

Description
Value Range
Default Value
Configuration File Reference

4.6.2.2 SIP Server

Registrar Server Address

Description
Value Range
Default Value
Configuration File Reference

Registrar Server Port

Description
Document Version 2012-07
Specifies the phone number to use as the user ID required for
registration to the SIP registrar server.
Note
•
When registering using a user ID that is not a phone number,
you should use the [SIP URI] setting.
Max. 32 characters
Not stored.
PHONE_NUMBER_n (Page 189)
Specifies the unique ID used by the SIP registrar server, which consists
of "sip:", a user part, the "@" symbol, and a host part, for example,
"sip:user@example.com".
Note
•
When registering using a user ID that is not a phone number,
you should use this setting.
•
In a SIP URI, the user part ("user" in the example above) can
contain up to 63 characters, and the host part ("example.com"
in the example above) can contain up to 127 characters.
Max. 195 characters (except ", &, ', :, ;, <, >, and space)
Not stored.
SIP_URI_n (Page 189)
Specifies the IP address or FQDN of the SIP registrar server.
Max. 127 characters
Not stored.
SIP_RGSTR_ADDR_n (Page 191)
Specifies the port number to use for communication with the SIP
registrar server.
Section 4 Web User Interface Programming
Administrator Guide 89