Http_Ssl_Verify; Cfg_Root_Certificate_Path - Panasonic KX-UT670 Administrator's Manual

Section 5 Configuration File Programming
Default Value
Web User Interface Reference

HTTP_SSL_VERIFY

Value Format
Description
Value Range
Default Value

CFG_ROOT_CERTIFICATE_PATH

Value Format
Description
Value Range
Default Value
156 Administrator Guide
Panasonic_{MODEL}/{fwver} ({mac})
HTTP User Agent (Page 77)
Integer
Specifies whether to enable the verification of the root certificate.
•
0 (No verification of root certificate)
•
1 (Simple verification of root certificate)
•
2 (Precise verification of root certificate)
Note
•
If set to "0", the verification of the root certificate is disabled.
•
If set to "1", the verification of the root certificate is enabled. In
this case, the validity of the certificate's date, certificate's chain,
and the confirmation of the root certificate will be verified.
•
If set to "2", precise certificate verification is enabled. In this
case, the validity of the server name will be verified in addition
to the items verified when "1" is set.
•
If the unit has not obtained the current time, verification will not
be performed irrelevant of this setting. In order to perform
verification it is necessary to first set up the NTP server.
0
String
Specifies the URI of the root certificate.
Note
•
Changing this setting may require restarting the unit.
Max. 500 characters
Note
•
The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
–
"<user>" must be less than 128 characters.
–
"<password>" must be less than 128 characters.
–
"<user>:<password>@" may be empty.
–
The total of "<scheme>://" and "<host>:<port>/<url-path>"
must be less than 245 characters.
–
":<port>" can be omitted if you do not need to specify the
port number.
Empty string
Document Version 2012-07