Description
Value Range
Default Value
SIP_CONTACT_ON_ACK_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
SIP_TIMER_B_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference
SIP_TIMER_D_n
Parameter Name Example
Value Format
Description
Value Range
Document Version 2012-07
Specifies whether to check the username part of the SIP URI in the
"To" header when receiving the INVITE message with an incorrect
target SIP URI.
•
Y (Enable username check)
•
N (Disable username check)
Note
•
If set to "Y", the unit will return an error reply when it receives
the INVITE message with an incorrect target SIP URI.
•
If set to "N", the unit will not check the username part of the SIP
URI in the "To" header.
N
SIP_CONTACT_ON_ACK_1, SIP_CONTACT_ON_ACK_2, ...,
SIP_CONTACT_ON_ACK_6
Boolean
Specifies whether to add the "Contact" header to SIP ACK message.
•
Y (Add the "Contact" header)
•
N (Do not add the "Contact" header)
N
SIP_TIMER_B_1, SIP_TIMER_B_2, ..., SIP_TIMER_B_6
Integer
Specifies the value of SIP timer B (INVITE transaction timeout timer),
in milliseconds. For details, refer to RFC 3261.
250–64000
32000
Timer B (Page 94)
SIP_TIMER_D_1, SIP_TIMER_D_2, ..., SIP_TIMER_D_6
Integer
Specifies the value of SIP timer D (wait time for answer resending), in
milliseconds. For details, refer to RFC 3261.
0, 250–64000
Section 5 Configuration File Programming
Administrator Guide
207