Port_Punch_Intvl_N; Sip_Add_Rport_N; Sip_Requri_Port_N - Panasonic KX-UT670 Administrator's Manual

Description
Value Range
Default Value

PORT_PUNCH_INTVL_n

Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference

SIP_ADD_RPORT_n

Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference

SIP_REQURI_PORT_n

Parameter Name Example
Document Version 2012-07
Specifies whether to enable the cancelation of registration before the
SIP function shuts down when, for example, the configuration has
changed.
•
Y (Enable registration cancelation before shutting down)
•
N (Disable registration cancelation before shutting down)
Note
•
If set to "Y", registration cancelation is enabled.
•
If set to "N", registration cancelation is disabled even when the
SIP stack is shutting down.
N
PORT_PUNCH_INTVL_1, PORT_PUNCH_INTVL_2, ...,
PORT_PUNCH_INTVL_6
Integer
Specifies the interval, in seconds, between transmissions of the Keep
Alive packet to the unit in order to maintain the NAT binding information.
Note
•
This setting is available only when "SIP_TRANSPORT_n" is set
to "0" for UDP.
0, 10–300 (0: Disable)
0
Keep Alive Interval (Page 96)
SIP_ADD_RPORT_1, SIP_ADD_RPORT_2, ..., SIP_ADD_RPORT_6
Boolean
Selects whether to add the "rport" parameter to the top Via header field
value of requests generated. For details, refer to RFC 3581.
•
Y (Add Rport [RFC 3581])
•
N (Do not add Rport [RFC 3581])
N
Supports Rport (RFC 3581) (Page 97)
SIP_REQURI_PORT_1, SIP_REQURI_PORT_2, ...,
SIP_REQURI_PORT_6
Section 5 Configuration File Programming
Administrator Guide 201