Flashhook_Content_Type; Voice_Message_Available; Sip Settings; Sip_User_Agent - Panasonic KX-UT670 Administrator's Manual

Section 5 Configuration File Programming

FLASHHOOK_CONTENT_TYPE

Value Format
Description
Value Range
Default Value
Web User Interface Reference

VOICE_MESSAGE_AVAILABLE

Value Format
Description
Value Range
Default Value

5.8.2 SIP Settings

SIP_USER_AGENT

Value Format
Description
Value Range
Default Value
Web User Interface Reference
188 Administrator Guide
String
Specifies the type of signal sent when sending a flash hook event.
•
Signal
•
flashhook
Signal
Flash Hook Event (Page 108)
Boolean
Selects how the existence of voice messages is determined when a
"Messages-Waiting: yes" message is received.
•
Y (Determines that voice messages exist when
"Messages-Waiting: yes" is received with a "Voice-Message" line
included.)
•
N (Determines that voice messages exist when
"Messages-Waiting: yes" is received even without a
"Voice-Message" line included.)
Y
String
Specifies the text string to send as the user agent in the headers of SIP
messages.
Max. 40 characters
Note
•
An empty string is not allowed.
•
If "{mac}" is included in this parameter, it will be replaced with
the unit's MAC address in lower-case.
•
If "{MAC}" is included in this parameter, it will be replaced with
the unit's MAC address in upper-case.
•
If "{MODEL}" is included in this parameter, it will be replaced
with the unit's model name.
•
If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Panasonic_{MODEL}/{fwver} ({mac})
SIP User Agent (Page 88)
Document Version 2012-07