Pre-Provisioning Setting Example - Panasonic KX-UT670 Administrator's Manual

Section 2 General Information on Programming
DHCP and TFTP servers may be supplied with your operating system, provided through commercial services,
and are also distributed freely on the Internet. Use a server setup that best matches your environment.
When installing and setting up the DHCP server and TFTP server, refer to the documentation supplied with
the product.

2.4.2.3 Pre-provisioning Setting Example

This section gives an example of how to perform pre-provisioning.
Setting Example
TFTP server address
Distribution directory of TFTP server
Model name of the unit
MAC address of the unit
Provisioning server name (the server domain
name or URI where the configuration file used
for provisioning is to be stored)
File name of the configuration file used for
provisioning
URL of the configuration file used for
provisioning
DHCP server option 66
IP address range assigned by DHCP server
File name of the configuration file used for
pre-provisioning
The setting example as set in KX-UT670.cfg
Step 1
Connect the unit to the network, and turn the
power on.
•
The unit is assigned the IP address
"192.168.0.16" by the DHCP server.
•
The unit receives the TFTP server address
"192.168.0.130" from the DHCP server
using DHCP server option 66.
26 Administrator Guide
Item Description/Setting
192.168.0.130
/tftproot
KX-UT670
0080F0123456
provisioning.example.com
Config0080F0123456.cfg
http://provisioning.example.com/
Config0080F0123456.cfg
192.168.0.130
192.168.0.16 to 192.168.0.63
KX-UT670.cfg
CFG_STANDARD_FILE_PATH="http://
provisioning.example.com/Config{MAC}.cfg"
Note
•
"{MAC}" is replaced by the MAC address of the
unit.
(e.g., "0080F0123456")
Power on
IP Address:
SIP Phone
192.168.0.16
TFTP Address:
192.168.0.130
DHCP Server
Document Version 2012-07