Rtcp_Send_By_Sdp_N; Rtp_Close_Enable_N; Miscellaneous Voip Settings; Outbanddtmf_N - Panasonic KX-UT670 Administrator's Manual

Section 5 Configuration File Programming

RTCP_SEND_BY_SDP_n

Parameter Name Example
Value Format
Description
Value Range
Default Value

RTP_CLOSE_ENABLE_n

Parameter Name Example
Value Format
Description
Value Range
Default Value

5.7.3 Miscellaneous VoIP Settings

OUTBANDDTMF_n

Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference
182 Administrator Guide
RTCP_SEND_BY_SDP_1, RTCP_SEND_BY_SDP_2, ...,
RTCP_SEND_BY_SDP_6
Integer
Specifies whether to send RTCP signals by SDP (Session Description
Protocol).
0–1
–
0: Send RTCP signals using the value specified in
"RTCP_INTVL_n", if the "RTCP_ENABLE_n" parameter is enabled.
–
1: Send RTCP signals using the value specified in the SDP attribute
"a=rtcp:".
0
RTP_CLOSE_ENABLE_1, RTP_CLOSE_ENABLE_2, ...,
RTP_CLOSE_ENABLE_6
Boolean
Specifies whether to enable processing to close held RTP sockets.
•
Y (Enable RTP Close)
•
N (Disable RTP Close)
Y
OUTBANDDTMF_1, OUTBANDDTMF_2, ..., OUTBANDDTMF_6
Boolean
Specifies the method for transmitting DTMF tones.
•
Y (Outband [use telephone-event])
•
N (Inband)
Note
•
If set to "Y", DTMF tones will be sent through SDP, compliant
with RFC 2833.
•
If set to "N", DTMF tones will be encoded in the RTP stream.
Y
DTMF Type (Page 102)
Document Version 2012-07