Unconditional (Phone Number); Busy (Enable Call Forward) - Panasonic KX-UT670 Administrator's Manual

Section 4 Web User Interface Programming

Unconditional (Phone Number)

Description
Value Range
Default Value

Busy (Enable Call Forward)

Description
Value Range
Default Value
114 Administrator Guide
Specifies the phone number of the destination to forward all incoming
calls to.
Note
•
If you change this setting when [Synchronize Do Not Disturb
and Call Forward] is set to [Yes], the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
Max. 32 characters
Note
•
You cannot leave this field empty if [Unconditional (Enable
Call Forward)] is set to [Yes].
Not stored.
Selects whether to forward incoming calls to a specified destination
when the line is in use.
Note
•
If Do Not Disturb has been enabled on the server, the server
rejects incoming calls and the unit does not receive any calls,
even if you have selected [Yes] for this setting.
•
If you have selected [Yes] for this setting and Call Forward has
been enabled on the server, but the forwarding destinations
differ, incoming calls are forwarded to the destination set on the
server.
•
If Call Forward has been enabled on the server, incoming calls
are forwarded to the destination set on the server, even if you
have selected [No] for this setting.
•
You can synchronize the Do Not Disturb and Call Forward
settings from the Web user interface (® see [Synchronize Do
Not Disturb and Call Forward] in 4.7.2.1 Call Control) or
through configuration file programming (® see
"FWD_DND_SYNCHRO_ENABLE_n" in 5.8.1 Call Control
Settings).
•
If you change this setting when [Synchronize Do Not Disturb
and Call Forward] is set to [Yes], the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
•
Yes
•
No
No
Document Version 2012-07