Adding Applications - Panasonic KX-UT670 Administrator's Manual

Smart desk phone
Hide thumbs Also See for KX-UT670:
Table of Contents

Advertisement

If [Specify through configuration file] is selected, [Forbid change of the home screen
wallpaper] and [Forbid change of the phone screen wallpaper] will be grayed out.
For details about the administrator password, see 3.1.2 Phone User Interface Administrator
Menu.

6.5 Adding Applications

You can install third-party applications and manage (display application information, uninstall, etc.) them on
the phone. Applications must be installed via the SD card.
IMPORTANT
Sufficiently check the source and operations of all applications before installing. You may not be able
to install or operate some applications, depending on the application. Also, be aware that applications
may contain viruses or may be able to access location data or personal data etc. stored on the unit.
This data may then be leaked onto the Internet and used improperly.
Panasonic cannot accept any responsibility if an installed application causes performance problems
or losses of any kind to the user or a third party.
Prepare an application
You can install applications from the unit's Web browser or an SD card. When using an SD card, follow the
procedure below before installing.
Notice
Format the SD card before use. For details about formatting, refer to the Operating Instructions on the
Panasonic Web site (® see Introduction).
1.
Prepare an SD card.
For details about supported SD cards, refer to the Panasonic Web site (® see Introduction).
2.
Save the application data in the root directory of the SD card.
To install the application
1.
Press
2.
Tap [Administration], enter the administrator password, and then tap [OK].
3.
Tap [Applications].
4.
Tap [Install applications].
5.
Select the installation method from [SD card] or [Browser].
6.
Select the application to install.
7.
Tap [Install].
8.
Tap [OK].
Note
For details about the administrator password, see 3.1.2 Phone User Interface Administrator
Menu.
To manage the application
1.
Press
2.
Tap [Administration], enter the administrator password, and then tap [OK].
3.
Tap [Applications].
4.
Tap [Manage applications].
5.
Select the application.
6.
Select the operation and tap [OK].
Document Version 2012-07
on the Home screen, and then tap [Settings].
on the Home screen, and then tap [Settings].
Section 6 Useful Telephone Functions
Administrator Guide
213

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents