Section 4 Web User Interface Programming
Default Value
Configuration File Reference
Confirm New Password
Description
Value Range
Default Value
Configuration File Reference
4.5.4 Web Server Settings
This screen allows you to change the Web server settings.
4.5.4.1 Web Server Settings
Web Server Port
Description
Value Range
86
Administrator Guide
Not stored.
Note
•
When a user logs in to the Web user interface for the first time,
after clicking OK on the authentication dialog box, the [Change
User Password] screen is displayed automatically to make the
user set a password.
USER_PASS (Page 140)
Specifies the same password that you entered in [New Password] for
confirmation.
6–16 characters (except ", &, ', :, <, >, and space)
Note
•
This value must be the same as the value entered in [New
Password].
Not stored.
USER_PASS (Page 140)
Specifies the port number used by the Web server.
80, 1024–49151
Note
•
You cannot specify here the same port number as any of the
port numbers specified for the individual lines in [Source
Port] in 4.6.2.5 SIP Source Port.
Document Version 2012-07