Flex_Button_Labelx; Voip Settings; Codec Settings; Codec_G711_Req - Panasonic KX-UT670 Administrator's Manual

Section 5 Configuration File Programming
Value Range
Default Value

FLEX_BUTTON_LABELx

Value Format
Description
Value Range
Default Value

5.7 VoIP Settings

5.7.1 Codec Settings

CODEC_G711_REQ

Value Format
Description
Value Range
Default Value
176 Administrator Guide
Max. 32 characters
Note
•
The value range differs depending on the flexible button set in
"FLEX_BUTTON_FACILITY_ACTx", as follows:
–
X_PANASONIC_IPTEL_DN: 1–32 (ringtone number), 1–6
(line number)
–
X_PANASONIC_IPTEL_HEADSET: not available
–
X_PANASONIC_IPTEL_CONTACT: 1–32 digit number
–
X_PANASONIC_IPTEL_ONETOUCH: 1–32 digit number
For details about flexible buttons, refer to the Operating Instructions
on the Panasonic Web site (® see Introduction).
1,1
String
Specifies the message to be displayed on the screen when the flexible
button is pressed.
Note
•
You can use Unicode characters for this setting.
Max. 10 characters or 30 bytes
Empty string
Integer
Specifies whether to set "PCMU" as a codec selection automatically
when "CODEC_ENABLEx_n" is set to any codec selection other than
"PCMU".
•
0 (Do not set "PCMU")
•
1 (Set "PCMU")
1
Document Version 2012-07