Section 4 Web User Interface Programming
Default Value
Configuration File Reference
Tone Timings
Description
Value Range
Default Value
Configuration File Reference
4.7.3.5 Reorder Tone
Tone Frequencies
Description
Value Range
Default Value
Configuration File Reference
Tone Timings
Description
Value Range
Default Value
Configuration File Reference
100
Administrator Guide
350,440
DIAL_TONE4_FRQ (Page 147)
Specifies the pattern, in milliseconds, of stutter dial tones to notify that
a voice mail is waiting, using up to 22 whole numbers (off 1, on 1, off 2,
on 2...) separated by commas.
Note
•
It is recommended that you set a value of 560 milliseconds or
more for the first value (off 1).
0–16000 (0: Infinite time)
560,100,100,100,100,100,100,100,100,100,100,100,100,100,100,10
0,100,100,100,100,100,0
DIAL_TONE4_TIMING (Page 148)
Specifies the dual-tone frequencies, in hertz, of reorder tones using 2
whole numbers separated by a comma.
0, 200–2000 (0: No tone)
480,620
REORDER_TONE_FRQ (Page 149)
Specifies the pattern, in milliseconds, of reorder tones using up to 10
whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
0–16000 (0: Infinite time)
60,250,190
REORDER_TONE_TIMING (Page 149)
Document Version 2011-11