Porsche 911 Carrera Technical Manual page 99

911 Carrera 4 (996)
Final drive -Differential, differential lock
Removing and installing sealing ring for flanged shaft
Removal
Remove final drive
(refer to Serv. No. 39 88 19),
~
2. Press out flanged shaft with two mounting
levers.
3. Lever out sealing ring using a suitable tool
~
Installation
1. Fill the space between the dust and sealing
lips with grease (e.g. Liqui -Moly) and drive in
the sealing ring up to the mounting face using
special tools 9537 and P254.
A -New snap ring
175_97
3. Grease the snap ring well and drive in the
flanged shaft using the special tools P254
and 9247/1.
"
(II
...~::::::?:;:
258_98
2, Always replace the snap ring for the halfshaft
flange. To do this, clamp the flange in the vice
with protective jaws and press out the snap
ring with the new snap ring "A",
39 59 19 Removing and installing sealing ring for flanged shaft
C4S39119 Printed in Gennany -14, 1998
39 -120