Porsche 911 Carrera Technical Manual page 61

Removing and installing sealing ring for input shaft
Removal
1. Remove transmission (see Page 34 -3).
5. Pull out sealing ring by screwing in the
hexagon-head screw.
2. Remove the release lever for clutch.
3. Remove guide tube for release bearing.
/
\.
/
u
4. Screw special tool 9629 securely into the
sealing ring.
/i',(~
~
140.97
Note
The coil spring must be pulled off the input shaft
with a wire hook if the spring should jump down
when removing the sealing ring.
139.97
35 -2
35 50 19
Removing and installing sealing ring for input shaft
996351 Printed in Germany, 1997