Porsche 911 Carrera Technical Manual page 149

Manual transmission. Gears, shafts, into gearsh.
911 Carrera (996)
Installation
3. Drive in sealing ring with special tool 9256 as
far as the mounting face.
1. Push assembly sleeve 9255 onto the toothing
of the input shaft.
~
- -{
--
I
)
,.i._~~~~:~Jt:::~..,;
/
/
/'
'-~\
~~:==:=:::;~
\~;~::~~...;
095_99
094_99
2. Fill the space between the dust and sealing
lips on the sealing ring with grease
(e.g. Liqui -Moly).
4. Install the guide tube and tighten the fastening
screws to 10 Nm (7.5 ftlb.).
35 -203
35 50 19 Removing and installing sealing ring for input shaft -GT3
Printed in Germany -25, 1999 GT335201