Porsche 911 Carrera Technical Manual page 55

911 Carrera (996)
Manual transmission -Actuation, ass. housing
Removing and installing shift and selector cables
Note
The shift cable and selector cable can be
exchanged only together I as they possess a
common rubber sleeve.
4. Disengage the selector and shift cables on
the shift console. To do this, slide the locking
sleeves (6) forward as far as they will go and
turn clockwise to removal position.
Removal
Note
The shift and selector cables must not be
excessively bent or kinked.
1. Remove centre console
(refer to Service No. 68 17 19).
2. Lift shift console cover up and off.
3. Move shift lever to neutral position and fix
shift lever with special tool 9619.
~
9619
1 -Selector cable (blue)
2 -Shift cable (black)
3 -Adjuster open
4 -Adjuster closed
5 -Support bracket
6 -Locking sleeve
55o_97
,~
~
\
5. Disengage support bracket sleeves (5) on the
shift console. To do this, release the support
bracket sleeves and carefully pull out of the
support bracket.
@~
/~--I
1\
602.96
6. Remove parking brake console.
7, Remove underbody panel (middle and rear),
34 12 19 Removing and installing shift and selector cables
Printed in Germany -4, 1997 996347
34 -13