Porsche 911 Carrera Technical Manual page 148

35
Manual transmission -Gears, shafts, into gearsh.
911 Carrera (996)
Removing and installing sealing ring for input shaft
Removal
1. Remove engine-transmission unit and remove
the transmission.
4. Pull out sealing ring by screwing in the
hexagon-head screw.
2. Remove guide tube for release bearing.
3. Screw special tool 9251 securely into the
sealing ring.
093_99
Note
The coil spring must be pulled off the input shaft
with a wire hook if the spring should jump down
when removing the sealing ring.
092_99
Removing and installing sealing ring for input shaft -GT3
GT335201 Printed in Germany -25, 1999
35 50 19
35 -202