Porsche 911 Carrera Technical Manual page 57

11. From the passenger compartment, press rub-
ber sleeve out to the rear and pull B+ wire
out of the slotted sleeve.
Installation
Note
Each time the shift cables are removed from the
transmission lever, the retaining clips of the shift
cable end pieces must be replaced.
1. Position rubber sleeve.
55~97
1 -Rubber sleeve
553_97
2. Apply a generous coating of lubricant (e.g.
Contifix tyre mounting paste) on the rubber
sleeve and B+ wire in the area of the body
opening.
3. Push shift and selector cables through the
body opening from behind.
Take care not to soil the vehicle interior.
34 12 19 Removing and installing shift and selector cables
Printed in Germany -4, 1997 996347
34 -15