Porsche 911 Carrera Technical Manual page 47

Manual transmission -Actuation, ass. housing
911 Carrera (996)
Detach the support bracket sleeves A and B
at the support bracket. To do this, release
the support bracket sleeves (press tabs in
the direction indicated by the arrow) and ca-
refully pull them out of the support bracket.
11. Unscrew transmission/engine fastening
screws. To do this, use a long 3/8 inch ex-
tension.
Note
The engine may be lowered by up to 25 mm in
order to improve accessibility to the upper
screws.
9. Place transmission jack under the transmissi-
on and fasten fixing strap.
10. Remove transmission holder and transmissi-
on support.
1
8
2 ~
i'
~
¥
3
~
j.9S
~
4
~
5
97.122
97-130
12. Pull transmission to the front and lower it
carefully.
~"/\/
I
Installation
Install in reverse order, observing the following
points:
/
/
~--/
97-123
34 35 19 Removing and installing transmission G 96
Printed in Germany -4, 1997 996341
34 -5