Porsche 911 Carrera Technical Manual page 115

911 Carrera (996)
Manual transmission -Actuation, ass. housing
Refitting the transmission
Note
Grease teeth of the drive shaft with a very thin
coat of Olista Longtime 3 EP (only as protection
against corrosion).
1. Insert release lever into the release bearing
and fix in installation position with suitable ad-
hesive tape.
7
11O_99
1 -Hexagon-head bolt
2 -Support
3 -Bearing cover
4 -Needle-roller bearing with assembly bore
5 -Sealing ring
6 -Clutch control shaft
7 -Release lever
4. Remove adhesive tape through the assembly
opening in the release fork.
114_99
5. Fit needle-roller bearing, bearing cover
and support. Tighten fastening screw to
10 Nm (7.5 ftlb.).
2. Fit the transmission onto the engine.
3. Fit release lever shaft with sealing rings.
6. Fit air flanges.
34 -203
34 35 27 Removing and refitting the transmission -GT3
Printed in Germany -25, 1999 GT334201