911 Carrera (996)
Manual transmission -Actuation, ass. housing
Disassembly and assembly instructions
Disassembly
1. Remove closure cap.
To do this, drill a 3.5 mm hole into the centre
of the cap, screw in a sheetmetal screw
(4.8 x 25) with large washer, and lever the
cap out using two screwdrivers.
Assembly
1. Fit selector lever and shift pinion in the
correct position.
(The driver cross is vertical and the selector
lever reaches the flat surface of the housing.
400_99
484_98
2. Fit the retainer in the correct position and
make sure it is seated properly.
A -Retainer
308_99
34 -237
34 37 37
Disassembling
and assembling
transmission
housing -GT3
Printed in Germany -29,
1999
GT334231