Porsche 911 Carrera Technical Manual page 126

911 Carrera (996)
Manual transmission -Actuation, ass. housing
3. Fix shift rod for 5th and 6th gears by shifting
into a gear and pull off the needle bearing
inner race.
2. Shift into a gear and fit all gear wheels.
3. Move the shift rods for 5th/6th gear and
reverse gear to installation position and adjust
the shift forks.
4. Adjust shift fork for reverse gear.
To do this, fix the shift rod with special tool
9650. Then adjust the fork so that just
enough play remains at the shift collar when
reverse gear is engaged. The synchronising
ring must be free to rotate in idle position.
\\"L,
A -Arms of puller 9284
B -Pressure piece 9656
147_99
J
J.
0
"",((
Assembly
1. Check synchronising rings by pushing them
onto the gear wheels and measuring the gap
"A" with a feeler gauge.
Dol])
,.,~
A -Special tool 9650
B -M6xll 0 screw
=i
l
min. 0.9 mm
=10.6...0.7 mm
315_99
Installation dimension (new)
Wear limit
\'\
\\\
313_99
34 -215
34 35 37 Disassembling and assembling transmission -GT3
Printed in Germany -29, 1999 GT334209