Porsche 911 Carrera Technical Manual page 101

Final drive -Differential, differential lock
911 Carrera 4 (996)
Removing and installing cover for final drive
Installation
Install in reverse order I observing the following
points:
Removal
1. Remove final drive
(refer to Serv. No. 39 88 19).
2. Drain oil.
1. Fit sealing ring without twisting and coat it
with Vaseline.
3. Press out flanged shaft with two mounting
levers.
4. Unscrew fastening screws for the lid and
remove the lid by tapping it with a plastic
hammer.
2. Fit lid carefully and tighten screws uniformly
in diagonally opposite sequence.
Use special tool 9321 to aid assembly.
A -Centring pins 9321
260_98
.
8
39 58 19 Removing and installing cover for final drive
C4S39121 Printed in Gennany -14, 1998
39 -122