Porsche 911 Carrera Technical Manual page 52

Manual transmission -Actuation, ass. housing
911 Carrera (996)
Installation
Note
The shift mechanism is designed so that installa-
tion and adjustment are a single work step.
Preconditions for this are:
Special tool 9619 must be fitted to fix the
shift lever.
The transmission must be in neutral.
1. Install the shift console and tighten the fasten-
ing nuts with 10 Nm (7.5 ftlb.).
2. Fasten shift and selector cables on the shift
console:
1 -Selector cable (blue)
2 -Shift cable (black)
3 -Adjuster open
4 -Adjuster closed
5 -Support bracket
603-1-96
Fit support bracket sleeves (5) in the correct
position.
It must be possible to hear and feel them en-
gage.
3. Remove special tool 9619 and shift through
all gears as a test.
4. Clip in shift console cover
Engage shift and selector cables in the open
adjusters (3) and close the adjusters (see en-
larged view).
The locking sleeves must move to the end
position automatically.
5. Install centre console
(refer to Service No. 68 17 19).
34 08 19
996347
Removing and installing shift console
Printed in Germany -4, 1997
34 -10