Porsche 911 Carrera Technical Manual page 29

Clutch, actuation 911 Carrera (996)
Notes on removal and installation
Removal
4. Detach diagnostic socket.
&
Warning
Danger of injury and / or damage
during disassembly and assembly
work!
The clutch boost spring can
become detached on its own.
> Before the start of disassembly
work in the area of the clutch
pedal lever (exception: clutch
pedal switch), the clutch boost
spring must be fixed with
a cotter pin (Figure 478_98) .
1. Disconnect battery ground cable.
2. Remove driver's seat (to facilitate work),
5. Detach relay carrier, unclip and lower into
the footwell.
3. Remove air duct (A).
The air duct is plugged in.
86_98
6. Release clutch pedal switch by turning it.9Oo
and pull it out of the installation opening.
290_1_97
Removing and installing the clutch pedal
Printed in Gennany -18, 1998
30 05 19
996309
30 -12