3. After assembly, measure the basic locking
torque with one shaft bevel gear driven and
the other one fixed. To do this, clamp one
flange in the vice with two screws and
position differential. Insert second flange
with shop-made connecting piece and turn
differential with a torque screwdriver.
A basic locking torque of 5 ...15 Nm
(3.5 ...11 ftlb) must be reached.
A
~
~
~
571_98
8
.
39 -206
39 40 37
Disassembling
and assembling
GKN differential
lock -GT3
GT339201
Printed
in Gentlany
-25,
1999