Honeywell UDC3500 Product Manual page 329

Step
11 Contact your Honeywell Representative to place an order. Please have a
company purchase order number available before you call. The order entry
person will ask for the following information:
With this information, a new code number set will be generated for your
instrument(s).
When you have the new code number set provided by Honeywell, repeat
12
steps 1 to 6.
13
Press the
"XXXX" "ENTER1", where XXXX is a unique code number for this particular
instrument. Using the
14
Press the
"ENTER2". Using the
15
Press the
"ENTER3". Using the
16
Press the
numbers and add the new software feature. If the code numbers were
entered incorrectly or if the wrong code numbers for this particular
instrument were entered, then the controller will go into Manual Mode and
flash the message "FAILSAFE" on the lower display. Check the code
numbers being entered and repeat steps 12 through 16.
17 When the instrument finishes the operation, it automatically resets itself and
restarts in the product mode. The instrument configuration now includes the
added software feature(s).
10/05
1. Software Upgrade Part Number(s) you require per Table 8-3
2. Model Number of your instrument(s)
3. Serial Number of your instrument(s)
4. Code Numbers 1, 2 and 3 from your instrument(s)
5. Purchase order number.
Func
Loop 1/2
key. The instrument will now display
Func
Loop 1/2
key. The instrument will now display "XXXX"
Func
Loop 1/2
key. The instrument will now display "XXXX"
Func
Loop 1/2
key. The instrument will process the new code
UDC3500 Universal Digital Controller Product Manual
What to do
and keys, enter the new Code 1 number.
and keys, enter the new Code 2 number.
and keys, enter the new Code 3 number.
Troubleshooting/Service
315