Figure 4-17 Real Time Clock Maintenance Screen - Honeywell UDC3500 Product Manual

Real Time Clock
This screen only appears in instruments that have the Real Time Clock option. The Real
Time Clock Screen shows both the clock time in the controller and the clock time in your
PC. Pressing the "Set Clock" button will set the controller to the same settings as in your
PC. It is recommended that units using Email use only this screen to set the Real Time
Clock, as that will ensure that the clock and time zone settings used to time-stamp Emails
are correct.
See Section 3.22 for other information about the Real Time Clock option.
ATTENTION
The Real Time Clock will not automatically adjust for Daylight Savings Time; it must be done manually.
The Real Time Clock will automatically adjust for Leap Years to make February 29 days long.
10/05

Figure 4-17 Real Time Clock Maintenance Screen

UDC3500 Universal Digital Controller Product Manual
Monitoring and Operating the Controller
251