System Initialization - Tadiran Telecom Emerald ICE Installation Manual

System Initialization

5
Proceed with the following to initialize the KSU.
1.Verify that the KSU power is OFF.
2.Verify that the jumper pins on J7 on the CCB Board are in the ʺCold Position.
J7 Pins to COLD
3.'Power up the KSU and wait 10 seconds.
4.Power down the KSU and move the J7 pins to the ʺNormalʺ position.
KSU Power Switch
J7 Pins to NORMAL
5-1
Emerald ICE Installation & Hardware Reference Manual