Table of Contents
Advertisement
InfiniBand Switch Platform Hardware User Manual
1.6.2
Installing the Cable Holder
1. Place the cable holder next to the rack, on the connector side of the chassis, and iden-
tify the holes where the caged nuts are to be placed.
Mellanox Technologies
Now is the time to install the cable holder.
Figure 9: Cable Holders
The cable holders should go to the outside of the vertical supports.
Right side cable holder
12 X M6 caged nut
12 X M6 bolt for caged nut
Left side cable holder
Cable support shelf
For each model of chassis there
is the one support shelf for every
two leafs.
25
Advertisement
Table of Contents
