Setting The Demand Address And Enabling Demand Setting - Daikin DGE601A51 Installation Manual

5.3.2

Setting the demand address and enabling demand setting

Set the demand address.
1. Press the BS1 button for 5 seconds or more.
The LEDs and segments will be in the state shown below.
H1P
2. Press the BS2 button 2 times. (Select the setting item.)
3. Press the BS3 button.
You can now find out the current demand address setting by the LED (segment).
4. Press the BS2 button to change to any demand address.
(Set the demand address number within the range of 0 to 31.)
5. Press the BS3 button 2 times to confirm the demand address setting.
Next, enable demand setting.
6. Press the BS2 button 12 times. (Select the setting item.)
7. Press the BS3 button.
You can now find out the currently set value (enabled/disabled) by the LED (segment).
8. If it is disabled, press the BS2 button 1 time to enable it.
The LEDs and segments will be in the state shown below.
demand setting
(enabled)
9. Press the BS3 button 2 times to confirm the set value.
10. Press the BS1 button 1 time to return to the normal mode.
NOTE
If you want to use the demand control of the External Control Adapter for Outdoor Unit,
you do not need to perform this setting.
62
Outdoor unit of the LED display
H2P H3P
Setting items
H1P
Installation Manual 3P581074-1D
DGE601A51/DGE602A51
LED (segment) display
H4P H5P H6P
LED (segment) display
Outdoor unit of the LED display
H2P H3P H4P H5P
Outdoor unit of the
segment display
H7P SEG1 SEG2
2 0
Outdoor unit of
the segment
display
H6P H7P SEG1 SEG2 SEG3
0 0
SEG3
0
1
English