Using The Ts-850I/Ts-860I; Using The Speakerphone; Adjusting The Handset Volume; Locking And Unlocking The Keypad - Talkswitch TS-860i User Manual

USING THE TS-850i/TS-860i

Using the speakerphone

During a call, press the speakerphone button on the side of the phone. To
deactivate the speakerphone, press the speakerphone button again. See Handset
— side view on page 4.
NOTE: To enjoy the best sound quality, place the handset horizontally with the
loudspeaker facing up (located on the back of the handset).

Adjusting the handset volume

During a call, press the volume up or volume down buttons on the side of the
phone to adjust the volume up or down. The volume setting is automatically
saved when you end the call. See Handset — side view on page 4.

Locking and unlocking the keypad

If you are carrying the handset around, you can lock the keypad so that you do
not use it accidentally.
1. In Idle mode, press
keypad, press
The keypad unlocks automatically when you answer an incoming call.

Activating silent mode

You can activate silent mode to disable the ringer and confirmation sounds. This
might be useful when in meetings or at night. The system will route calls
according to your extension's unanswered call cascade, and the phone will add
missed calls to the call log.
1. In Idle mode, press
ringer and confirmation sounds, press
off softkey.
Alternatively, when the phone is ringing, press the Silence softkey. The
phone will disable the ringer during the current call.
2 2
, and then press the Lock softkey. To unlock the
, and then press the Unlock softkey.
, and then press the Silence on softkey. To restore the
, and then press the Silence
T S - 8 5 0 i A N D T S - 8 6 0 i U S E R G U I D E