Answering Call Waiting; Answering A Queued Call; Picking Up A Call For Any Extension; Picking Up A Call For A Specific Extension - Talkswitch TS-860i User Manual

Answering call waiting

1. If you hear the call waiting tone during a call, press the Green Phone key.
The first call is put on hold automatically.
2. To switch between the two calls, press the Options softkey, choose Swap
calls, and then press the OK key.
3. To set up a conference call, press the Options softkey, choose Conference,
and then press the OK key.
If you are making an analog call over the traditional phone line, you must engage
Flash to answer call waiting. To engage Flash, press the R # key for approximately
two seconds until you connect to the other caller.

Answering a queued call

1. Press the Hold softkey. The current call is put on hold.
2. Dial 7, and then press the Green Phone key. The system connects you to the
oldest call in the queue.
OR
1. Press the Red Phone key to end the current call. If you have a queued call,
your extension will ring.
2. Press the Green Phone key to answer the queued call.

Picking up a call for any extension

1. To answer an incoming call for any extension, dial
Green Phone key.

Picking up a call for a specific extension

1. To answer an intercom or incoming call for a specific extension, dial
extension, and then press the Green Phone key.

Answering an analog call

If you have connected a telephone cable from the Line port on the base to the
telephone wall socket, the base can receive an analog call over the traditional
phone line.
1. Press the Green Phone key.
If the base receives an analog call, all handsets will ring by default. You can
disable a handset from ringing during an incoming analog call.
2 8 T S - 8 5 0 i A N D T S - 8 6 0 i U S E R G U I D E
9, and then press the
7 +