INSTALLING THE TS-850i
Installing the base
1. Place the base near a wired Ethernet
router, either on a tabletop or
mounted on a wall. Avoid placing the
base in a location with a lot of metal,
or near devices that
cause interference.
2. Connect the Ethernet cable from the
WAN port on the base to a LAN port
on your router or Ethernet switch.
The TalkSwitch unit must be
connected to the same LAN.
3. Optionally connect the telephone
cable from the Line port on the base
to the telephone wall socket. This
will allow you to use the TS-850i with
a traditional phone line.
E V E R Y C A L L C O U N T S
Base / WAN
Router / LAN
Base
Phone socket
7