Rejecting A Call; Muting A Call; Ending A Call; Caller Id - Talkswitch TS-860i User Manual

1. In Idle mode, press the OK key to access the Main menu.
2. Choose Settings, and then press the OK key.
3. Choose Telephony settings, and then press the OK key.
4. Choose Call groups, and then press the OK key.
5. Clear the Landline box.

Rejecting a call

1. Instead of answering the call, press the Reject softkey. Rejecting the call
routes it to your extension's call cascade (e.g. voicemail or another user).
• If your phone is configured as an IP extension, rejecting the call routes it
to your extension's busy call cascade.
• If your phone is configured as an analog extension, rejecting the call
routes it to your extension's no answer call cascade.
You can also turn off the ringer. See Activating silent mode on page 22.

Muting a call

1. During a call, press the Mute softkey. The phone switches off the microphone.
The person on the line will not be able to hear what you are saying. To turn
the microphone on again, press the Mute off softkey.

Ending a call

1. During a call, press the Red Phone key, or place the handset in the
handset charger.

Caller ID

When you receive an incoming call, the caller ID appears if you have the service,
with the following exceptions:
• If the caller has blocked display of caller ID, no caller ID appears.
• If caller ID based routing has an alternate name set up, the alternate name
appears instead of the caller ID name.
• If the caller is stored as a contact, the contact name appears instead of the
caller ID name or the alternate name.
E V E R Y C A L L C O U N T S 2 9