Installing The Handset Charger; Installing The Batteries - Talkswitch TS-860i User Manual

Installing the handset charger

1. Place the handset charger within the signal range of the base. The handset
has an indoor signal range of up to 150 feet (50 meters) from the base.
Concrete and metal objects might affect the signal range.
2. Connect the power adapter from
the power outlet to the power
supply connector. Use a
continuous power outlet without
a switch, which provides
uninterrupted power. We
recommend using an AC surge
arrester in the power outlet.
This is to avoid damage to the
equipment caused by lightning
and other electrical surges.
Only use the power supply
included with the product. Using
an unauthorized power supply
will invalidate the product
warranty and may damage the
telephone.

Installing the batteries

Use only approved rechargeable batteries. Never use other batteries or
conventional alkaline batteries.
TS-850i: AA Nickel Metal Hydride (Ni-MH) 1800+ mAh 1.2V.
TS-860i: Lithium Ion (Li-ion) 650 mAh 3.7V.
1. Release the battery cover from the bottom.
8
TS-860i charger
TS-860i handset
T S - 8 5 0 i A N D T S - 8 6 0 i U S E R G U I D E