2. Navigation Tasks
2.2.1
Route planning
A route can be created two ways: Modify an existing route to create a new route or create a new route from scratch.
A route consists of the following:
•
Position of each waypoint
•
Turning instructions for each waypoint
•
Safety limits between waypoints (channel limits)
Information notebook:
•
Information pages to alert the operator to a given waypoint or a chosen area.
•
Automatic and/or manual notebook function to tell operator position-based information.
Voyage optimisation parameters: See voyage optimization on the next page.
2.2.2
Route calculation
Route calculation for voyage planning includes the following:
Route profile calculation:
•
Distance between consecutive waypoints
•
Course between waypoints
•
Calculation of wheel over point
Route check:
•
Grounding alarm based on available depth information in digital chart database.
Voyage optimisation:
•
Timetable optimisation
•
Optimisation based on economical factors
• The ECDIS processor calculates optimum speed and course between each waypoint, ETA and fuel consumption,
based on the defined data. There are four calculation strategies: Max. Speed, Timetable, Lowest Cost and Best
Profit. In case of great circle sailing between two waypoints, the ECDIS calculates minimum and maximum
latitudes, and if needed adds an extra waypoint(s) so as not to exceed minimum and maximum latitudes.
2.2.3
Chart planning
Chart planning consists of the following steps:
1. Load new S57 and ARCS charts
2. Update existing S57 and ARCS charts
3. Manage chart permits
4. Manually update charts
2-2
•
Safe water calculation based on safety limits
•
Required steering accuracy for individual leg
•
Speed restrictions for legs
•
Total distance
•
Estimated time for voyage