Trackpilot Window - Furuno FEA-2107 Operator's Manual

27.2.7

Trackpilot window

Trackpilot order window for DNV specification
SET COURSE
SET RADIUS
SET R.O.T.
SET SPEED
MODE
ACKN. WARNING
The trackpilot window displays the following information:
•
SET R.O.T.: Current set rate of turn based on current speed and set turning
radius.
•
SET COURSE: Current set course.
•
MODE: Indicates chosen steering mode.
•
PLAN SPEED: Planned speed in current leg of the monitored route.
•
ACKN WARNING: Steering-related alarms displayed in lower status bar
of ECDIS are also displayed on the conning display.
This is called the trackpilot extended window, where the following additional
information is available:
•
SET RADIUS: Indicates chosen radius for turn.
•
PROG CRS: Course after turn designed by program course change or
program track steering mode.
•
SET HDG: Calculated heading for ship based on SET COURSE and
DRIFT. This information is available when the program track steering is in
use.
xxx.x deg
x.x nm
xxx.x deg/min
xx.x kt
(steering mode)
(steering related warning)
27. Conning Display
27-5