1.2.2 Multiple Workstation Configuration - Furuno FEA-2107 Operator's Manual

1.2.2 Multiple workstation configuration

In the multiple workstation configuration, there can be two workstations connected together by a Local Area
Network (LAN). In this configuration, one workstation is used as the "sensor source" for navigation sensors and the
other workstation(s) are using the sensor source workstation to communicate with sensors, receiving and
transmitting data from/to workstation via the LAN. In the multiple workstation configuration where navigation
sensors are connected to two workstations, the sensor source may be changed and still receive and transmit
information from/to the system and to/from navigation sensors.
ECDIS Monitor
MU-201CE
(FEA-2107)
or
100-230
MU-231CE
VAC
(FEA-2807)
CALCOMP
DRAWING-
BOARD III
DIGITIZER
ECDIS PROCESSOR
EC1000C
RADAR OVERLAY PCB
100-230 VAC
FAR-2xx7
series radar
Control Unit
RCU-018
Control Unit
RCU-015
Remote Control Unit
RCU-016
ECDIS Monitor
MU-201CE
(FEA-2107)
or
100-230 VAC
MU-231CE
(FEA-2807)
ECDIS PROCESSOR
100-230
EC1000C
VAC
RADAR OVERLAY PCB
FAR-2xx7
series radar
Control Unit
RCU-018
or
Control Unit
RCU-015
Remote Control Unit
RCU-016
Category of Units: All units protected from weather
Conning Monitor
MU-201CE
or
MU-231CE
100-230 VAC
HUB-
100
100-230 VAC
or
HUB-
100
100-230 VAC
Multiple workstation with connection to navigation sensors
ARPA RADARS
POSITION-FIXING EQUIPMENT
TRACK PILOT
LAN-ADAPTER
LOG/DUAL AXIS LOG
EC-1010
AIS
GYRO COMPASS
24 VDC
POSITION EQUIPMENT
ENGINE CONTROL
ECHOSOUNDER
LAN-ADAPTER
WIND SENSOR
EC-1010
WATER TEMP. METER
AMWSS
24 VDC
GYRO COMPASS
(SYNCHRO, STEPPER)
B-ADAPTER
LOG (200P/NM)
EC-1020
ANALOG INPUT (8 CHANNELS)
ANALOG OUTPUT
24 VDC
RADAR 1 (VIDEO, HL, AZ)
Selector
RADAR 2 (VIDEO, HL, AZ)
PRINTER
(USB)
ARPA RADARS
POSITION-FIXING EQUIPMENT
TRACKPILOT
LAN-ADAPTER
LOG/DUAL AXIS LOG
EC-1010
AIS
GYROCOMPASS
24 VDC
POSITION EQUIPMENT
ENGINE CONTROL
ECHOSOUNDER
LAN-ADAPTER
WIND SENSOR
EC-1010
WATER TEMP. METER
AMWSS
24 VDC
GYROCOMPASS
(SYNCHRO, STEPPER)
B-ADAPTER
LOG (200P/NM)
EC-1020
ANALOG INPUT (8 CHANNELS)
ANALOG OUTPUT
24 VDC
RADAR 1 (VIDEO, HL, AZ)
Selector
RADAR 2 (VIDEO, HL, AZ)
PRINTER
(USB)
1. Introduction
OPTION
EXTERNAL
DEVICE
1-3