Removing Chart Permits - Furuno FEA-2107 Operator's Manual

9. Raster Chart Material
9.4.7

Removing chart permits

Normally you do not need to remove permits during normal operation. However, it may be necessary to remove
chart permits from the system. Permits may be removed individually or collectively.
To remove chart permits, do the following:
1. Open the Chart menu and then choose Chart Permits from the menu.
2. To remove all permits, click the Select All button and then click the Remove button.
To remove an individual permit, use the cursor to choose the permit and then click the Remove button.
3. Check that chosen permits have been removed. Close the window by clicking the X on the window.
9-16