Finding Chart Alarms By Category - Furuno FEA-2107 Operator's Manual

11. Chart Alarms
11.5.2

Finding chart alarms by category

After you have done chart alarm calculation, the system is able to show you legs on the route where the chart alarms
are located. The system can show alarms by their category. To find chart alarms for a route by alarm category, do
the following:
1. In the Check page of the Plan Route dialog box, the Legs by alarm field has a selection box where you may
choose desired leg number.
11
2. Choose the leg number from the Leg field and then click Locate leg button. The system will display chosen leg
on electronic chart area as shown below.
11-12
Caution Area