Furuno FEA-2107 Operator's Manual page 215

Inserting new orange symbols using "copy"
You can make new orange symbols by copying existing orange symbols. Then you pick up an orange symbol and
make a copy of it. After copying you can modify position suitable for your purposes.
2.
1. Follow steps 1-3 on page 10-6 to display the Manual Update Planning dialog box.
2. Click the Copy button in the Manual Update Planning dialog box.
3. Place cursor on the desired object and press left mouse button.
4. Choose object from the Objects by Cell window. There can be more than one object in the area.
5. Click the Accept button.
6. New orange symbols are displayed in the list in the Manual Update Planning dialog box. Then click the Edit
Properties button.
7. Click the Edit Position button.
8. Place cursor on the desired location on the ECDIS display. Push the left mouse button and then click the Accept
button.
9. Click the Accept Manual Updates as Permanent button.
3. Click desired
object with cursor
and push left
mouse button.
7.
8. Set the positions
with cursor and
push left mouse
button. Then click
Accept.
10. Manual Updates
4.
5.
6.
9.
10-7