Furuno FEA-2107 Operator's Manual page 207

Mariner page
Pilot data:
•
Position: Choose Std or Other to show positions of pilot data records
with symbols on the chart.
•
Range: Choose Std or Other to circumscribe pilot data records with
circles on the display. The size of a circle depends on the value set in
pilot data.
•
Text: Choose Std or Other to show text of pilot data records on the
chart.
User chart:
•
Points: Choose Std or Other to show user points on user charts.
•
Lines: Choose Std or Other to show lines on user charts.
•
Symbols, Tidals: Choose Std or Other to show symbols and tidals on
user charts.
•
Areas: Choose Std or Other to show areas on the display. Color fill for
the areas can be chosen as transparent from 25 to 75% and as No color
fill. If No color fill is chosen, only the boundaries of the areas are
visible.
•
Only radar of Lines, Symbols, Areas: If chosen as Std or Other, only
those Lines, Symbols and Areas are displayed which have user
selection "on radar" activated for them in the user chart. This is used to
view only that part of the user chart which will be sent to the ARPA
radar connected to the system.
Chart Alarm: Choose Std or Other to show chart alarm warning areas in red
highlight.
Manual Updates: Choose Std or Other to show manual updates with orange
symbols.
Note: Visibility of manual updates made as true symbols are controlled
through Standard and Other pages of the Chart Display menu.
Ship: Own ship symbol is displayed in true scale if the displayed chart scale is
larger than the chosen limit scale and if the size of the true scale symbol is
longer than 6 mm on the chart display.
Radar overlay: Choose Std or Other to display the radar video overlay on the
display.
9. Raster Chart Material
9-45