How To Insert A Route Point On A Route; How To Move A Route Point On A Route - Furuno TZT9 Operator's Manual

5. At the last route point, select [End Route] at the top right-hand corner of the screen
to complete the route. The flag mark disappears and the following window ap-
pears.
The route is automatically named. The default route name is "RTE" plus the date
(e.g. RTE 2012-03-01). Select [Save]. If necessary, select [Rename] to change
the route name. The route is saved to the routes list.
5.2.3

How to insert a route point on a route

You can insert a new route point on a route leg.
1. Select a position on a route leg to insert a route point.
2. Select [Insert] from the pop-up menu. The blue square marks the position selected
and is highlighted. The route point is numbered according to its position in the
route, and the succeeding route points are renumbered.
1 1
3. Select [End Move] at the top right-hand corner of the screen.
5.2.4

How to move a route point on a route

You can move a route point on a route.
1. Select a route point on a route to display the pop-up menu.
1 1
2. Select [Move]. The selected route point is highlighted.
1 1
A new route has been created under this name:
RTE 2012-03-01
Rename
Save
3
2
2
2
Cancel
1 1
2 2
3
3
5. ROUTES
4 4
3 3
4 4
4 4
5-3