Deleting A Waypoint; Importing Waypoint From Other Routes - Furuno FEA-2107 Operator's Manual

13. Route Planning
13.5.6

Deleting a waypoint

To delete a waypoint, do the following:
1. Place the cursor on Route in the status bar and then click the Plan button to open the Plan Route dialog box.
Click the WP tab to open the WP page. Check Enable changes.
2. Highlight WP number on WP list which you wish to delete.
3. Click the Delete button.
13.5.7

Importing waypoint from other routes

You are able to choose waypoints from other routes to import them to current route. To import waypoints do the
following:
1. Place the cursor on Route in the status bar and then click Plan to open the Plan Route dialog box. Click the WP
tab to open the WP page. Check Enable changes.
2. Click the Import button. The following dialog box appears.
3. In the Copy from window, place the cursor in the Route box, spin the thumbwheel to choose the route from
which to copy waypoints and then push the thumbwheel.
4. Enter first waypoint to copy in "First wp to copy". Spin the thumbwheel to choose WP number and then push
the thumbwheel.
5. Enter number of waypoints to copy in "Number of wp's". Spin the thumbwheel to choose desired number and
then push the thumbwheel.
6. Enter where to import waypoints. To enter them after a WP in a route, enter waypoint number in the "Copy
after wp" box. If you want to enter them before a WP in the route where WPs will be imported, enter waypoint
number in the "Copy before wp" box.
Spin the thumbwheel to choose desired number and then push the thumbwheel.
7. Choose copying order, Direct or Reverse. "Direct" copies the waypoints in their original order; "Reverse"
copies them in reverse order. Spin the thumbwheel to choose desired option and then push the thumbwheel.
8. Click the Copy button.
9. When finished, click X at top right corner of the dialog box to close the dialog box.
13-12