Furuno FEA-2107 Operator's Manual page 35

Opening the sidebar on the display
Sidebar(s) may be opened as shown below. Two sidebars may be displayed.
1. Place the cursor on the area shown.
2. "Select Sidebar" appears in the mouse functions area.
See figure at right.
3. Click the right mouse button to show the sidebar
menu on the display.
4. Spin the thumbwheel to choose desired sidebar from
the menu and then push the thumbwheel.
To remove an item from the sidebar, deselect it
following this procedure.
HDG
SPD
(CALC)
SB (POSN)
COG
(POSN)
SOG (POSN)
Route
Autopilot
Conning
Docking
Chart Legend
Close
True Vect(G)
Past Posn rel
CPA 1.5 nm
3. ECDIS Screen
070.0°
1.8
Kt
1.7
Kt
045.1°
2.0
Kt
1.
3.
12 min
2 min
10 min
2.
3-7