How To Edit A Route; How To Create A Route From The Points List; How To Insert A Route Point On A Route - Furuno NavNet TZtouch3 Series Operator's Manual

5. ROUTES
5.2.3

How to create a route from the Points list

1. Go to the Home screen, the tap [Lists]→[Points].
2. Tap the point to be the first point in the route.
3. Tap [Add to Route], the tap [<] on the title bar to return one layer in the list.
4. Repeat steps 2-3 to enter all required points. The route is drawn on the preview
screen on the right-hand side.
5. Tap the close button on the title bar to close the [Points] list.
5.3

How to Edit a Route

5.3.1

How to insert a route point on a route

You can insert a new route point on a route leg as follows.
1. Tap a position on a route leg where to insert a route
point.
2. Tap [Insert] on the pop-up menu. The compass symbol
marks the position selected. The route point is num-
bered according to its position in the route, and the suc-
ceeding route points are renumbered.
3. Tap [End Move] at the top right-hand corner of the screen.
5-4