Parameter-Related Menus - Furuno FEA-2107 Operator's Manual

25. Parameters Setup
25.1.1

Parameter-related menus

Set time
Place the cursor on the date and time presentation on right-hand side of ECDIS display.
•
Use the left mouse button to display UTC time and local time alternately.
•
Use the right mouse button to change time zone and/or time.
In order to set the time, the following conditions must be met:
•
Set time on workstation chosen as the sensor source.
•
Kalman filter should be OFF.
•
Turn off any track steering mode (Goto WP or Goto Track).
Parameter backup
User can make backup copy of parameters. See Chapter 17 for details.
Installation parameters
The ECDIS system parameters are set by the installation parameters. Note: Access to the installation parameters
requires a key disk, which is delivered by the manufacturer. For details see the installation manual.
Navigation parameters
Parameters for your ship and routes. For more information about setting navigation parameters, see "Ship and route
parameters" on page 25-2.
Optimization parameters
This function is used to define parameters for speed and fuel consumption. For further details, see "Optimization
parameters setting" on page 25-7.
Print navigation parameters
Prints navigation parameters to default printer.
Print optimization parameters
Prints optimization parameters to default printer.
25-2