Using Senc Convert Window To Initiate Senc Conversion - Furuno FEA-2107 Operator's Manual

8.4.6

Using SENC convert window to initiate SENC conversion

Normally automatic SENC conversion is chosen and there is no need to initiate SENC conversions from the SENC
convert window. If you do not use the automatic SENC conversion, you need to manually initiate SENC conversion.
Another case in which you need to manually initiate SENC conversion is if you upgraded or reloaded the ECDIS
software from the ECDIS software CD ROM.
To initiate SENC conversions manually, do the following:
Go Back
1. Spin the thumbwheel to display Menu/Info/Chart Menu in the mouse functions
area and then push the right mouse button.
2. Choose SENC Convert from the menu and push the thumbwheel.
3. The SENC Convert window appears:
4. Use the Cells button to choose an individual chart or use the Groups button to
choose a group of charts. Then click the Convert button to initiate the SENC
conversion of the charts. Note that Convert only converts those charts which are
not currently converted into the SENC format. If your chosen chart or all members
of your chosen group are already in the SENC format, the Conversion list remains
empty. If all or some charts are not yet in the SENC format, they are added to the
Conversion list (see the example below). If, for some reason, you need to force
SENC conversion of an already converted chart, refer to paragraph 8.15 "Other
Features of Vector Charts".
Note 1: You may remove charts from the conversion list at any time. Use the cursor
to highlight the charts to remove and then click the Select button. Finally, click the
Cancel Conv. button to remove chosen charts from the SENC conversion queue.
Note 2: You can view the results of the finished SENC conversions at any time. Click
the Conv. History button to view the conversion log.
8. Vector Chart Material
8-23