Choosing Automatic Senc Conversion And Display Until Date - Furuno FEA-2107 Operator's Manual

8. Vector Chart Material
8.4.2

Choosing automatic SENC conversion and display until date

When you are loading new S57 charts Base cells and/or their updates into your hard disk, they can be automatically
converted to SENC format. Further, display dates can be set as issue dates automatically. Do the following to set
these options:
Go Back
8-18
1. Spin the thumbwheel to display Menu/Info/Chart Menu in the mouse function area
and then push the right mouse button.
2. Choose SENC Convert Settings from the menu and then push the thumbwheel.
3. A SENC Convert Settings dialog box appears:
4. Check Automatic SENC conversion and Automatic Display Until.
5. Click the X at the top of the dialog box to close the box.